Little FOCer Fully Assembled Flowglider Box *Charge Only*
Little FOCer Fully Assembled Flowglider Box *Charge Only*
Little FOCer Fully Assembled Flowglider Box *Charge Only*
Little FOCer Fully Assembled Flowglider Box *Charge Only*

Little FOCer Fully Assembled Flowglider Box *Charge Only*

$765.00
/
Color
  • $15 Flat Rate Shipping (Domestic Only)
  • Low stock - 3 items left
  • Inventory on the way

*This product is currently shipping in about two weeks from order date

Description:
A fully assembled flowglider box. This box is wired for a charge only BMS. Battery Harness included. 

Motor, IMU(gyroscope) and accelerometer will be pre-calibrated for compatibility with straight rails and a BLDC motor.

Upon arrival, you will still need to do run the motor configuration wizard to recalibrate the Little FOCer to your motor. You *should not* have to recalibrate the IMU and Accelerometer for use in straight rails. Further tuning is recommended as each rider has different preferences and riding styles.

Firmware comes preconfigured with reasonable application settings to get riding  on a 15s battery with conservative 63V max voltage and 30amps discharge. Each Little FOCer Fully Assembled Flowglider Box will be test ridden for QA before shipping to the end user.  

The Little FOCer Fully Assembled Flowglider Box is NOT A DROP IN REPLACEMENT  for ANY PEV. You will still need to acquire a battery w/bms between 48V and 84V for safe operation. 

While the fully assembled flowglider box is intended to lower the barrier of entry, it is still a DIY project and utilizing the massive amount of configuration options  requires a significant learning curve to operate safely. The open source software does not check or save you from bad or unsafe configurations. 
The Little FOCer and latching power switch are not compatible with a BMS  that uses a momentary power switch to turn on and provides no keepalive to keep this type of BMS from turning off while riding.
The Little FOCer is VESC compatible and can be managed with VESC-Tool*.  Mobile versions of VESC-Tool can be downloaded from your mobile app store. Desktop versions of VESC-Tool can be purchased from https://vesc-project.com/vesc_tool ... or compiled from source https://github.com/vedderb/vesc_tool

Parts List

  • Little FOCer BYOH version
  • latching power switch (yellow, green, blue, red)
  • footpad connector
  • motor power connector
  • hall sensor connector
  • *Updated* XLR charge port
  • *Updated* 16 pin molex 
  • 72mm x 53mm x 1mm 12W/Mk (gray) Thermal Pad
  • 3d printed in clear ABS Flowglider Box MK2 version
    • https://www.thingiverse.com/thing:5325535
    • brass inserts preinstalled
  • 3d printed in clear ABS Flowglider Cover MK2 version 
  • Aluminum lid with countersunk screw holes
  • 7 -  M3 x .5 nuts
  • 7 -  M3 x .5 x 8M (FT) screws
  • 13 - 18-8 SS - #2 x 3/8 flat head screws
  • 6 - nylon washers
  • 16 pin molex Battery Harness
  • Pre-crimped charge lines 

 

*VESC is a registered trademark of Benjamin Vedder

Order Processing Time
We require 2-3 business days to process and pack your order. This means that your order will typically ship out within 2-3 business days after it has been placed. Please note that our processing time may be longer during peak shopping periods, sales, or holidays.

Shipping Rates and Methods
We currently offer standard shipping to the United States and select international destinations. Our shipping rates are calculated based on the weight and destination of your order, and will be displayed at checkout.

Delivery Times
While we strive to provide accurate delivery estimates, we cannot guarantee delivery dates or times. Delivery times will depend on your location, the shipping method you select, and the carrier's delivery schedule. Please note that delivery may be delayed due to factors outside of our control, such as weather, customs clearance, or carrier delays.

Tracking Your Order
Once your order has shipped, you will receive a shipping confirmation email with a tracking number. You can use this tracking number to track your package online through the carrier's website.

International Shipping
For international orders, please note that the recipient is responsible for any customs fees, import duties, taxes, or other fees that may be imposed by their country's customs office.

Returns and Refunds
Please refer to our Returns and Refunds policy for information on how to return or exchange your order.

If you have any questions about our shipping policy or your order, please contact us at support@makerspev.com.

TOP NOTCH PEV PRODUCTS

Makers PEV strives to be the best in the industry when it comes to open source EV creation.

You may also like

Recently viewed

FAQs

Though we are working hard to make this as easy as possible with no soldering and programming needed this is ultimately still a DIY solution.

The choice in parts and settings are still up to the user to decide. This allows for great creativity but does require some knowledge. If you are new, please research existing builds and settings before proceeding!

The Little FOCer is simply a motor controller. It was created to run any electric motor.

Yes but the pint/GT uses proprietary connectors therefore will need some DIY in order to make it work.

You can use any battery that fits in your build up to 20s! At this time there are a few manufacturers that make compatible upgraded batteries. 2 that we would recommend include Z Battery Solutions and The Board Garage.

Pev.dev is the best collection of information at this time and I would recommend searching there for common issues but if you have more specific needs feel free to reach out to us at support@makerspev.com

The BMS choice is ultimately up to the user but a few popular options at the moment are ZBMZ, the ennoid and changing an xr/pint bms to charge only.

The Makers PEV BMS is in the works and coming soon.

Yes we ship anywhere we can from the United States. International shipping rates will apply and are not included in our $15 flat rate shipping.

Though most of the connectors from an XR controller can be reused it will require quite a bit of DIY and is significantly harder.

The only part that is not compatible is the momentary switch on the XR. The Little FOCer uses a latching switch.

No, our product replaces it completely and does not work with it in any way. You can choose to use either the Littler FOCer or your FM controller, but you cannot use them together.

No, at this time we are here to support people in their own builds and provide the equipment needed to do so.

VESC™ is the software that the Little FOCer hardware runs on similar to how Linux is the operating system for many different computers.